10-23-2008, 05:43 PM #1
Installing a recoil buffer in an AK-47
As many folks here know, I like the AK design. I also am pretty vocal about installing recoil buffers in these little gems to keep the bolt from slamming into the receiver. In the spirit of me being correct, I will show a photo summery of how to install one. I actually have one in mine already, but will reverse the process so you can see it.
Step 1. Remove the main spring. Real easy to do.
Step two, compress spring and remove nipple.
Last edited by Rustyshakelford; 10-23-2008 at 06:00 PM.firstname.lastname@example.org
10-23-2008 05:43 PM # ADSSurvival Sponsors Sponsored Post
- Join Date
- Advertising world
10-23-2008, 06:03 PM #2
Step Three slide off spring and slide recoil buffer onto the rod
Step four, and this is the tough part, compress the spring, and put the nipple back on.
This is what the recoil buffer looks like off the AK.
10-23-2008, 06:04 PM #3
Put the spring back into the AK-47 and put the cover back on.
10-23-2008, 06:11 PM #4
Sources for recoil buffers for the AK-47. No, I am not affiliated with any of these folks. They are just places I have bought stuff before and had no problems with.
I would like to say that the gunpartsguy.com did a spectacular job last time I ordered stuff. They can also supply lots of FAL and AK stuff, and this guy actually called me to make sure I got my order. I like that kind of customer service. Kuddos to him and his email@example.com
10-23-2008, 06:13 PM #5
One more thing. Make sure any firearm you are working on is unloaded prior to working on them. Duhfirstname.lastname@example.org
10-23-2008, 09:16 PM #6
Hope this helps out email@example.com
10-25-2008, 05:43 PM #7
Apparantly there is some controversy as to why one would want to install a recoil buffer in an AK-47. There is a simple answer to that. On an AK the bolt carrier slams against the receiver. As is seen by the photo of the recoil buffer, it keeps the bolt carrier from hitting the receiver. This not only prevents damage, but depending on your preferences, also keeps the AK from making the classic "Thwap" sound. It reduces recoil, reduces noise, and prevents damage to the receiver. Many would, and have, suggested that an AK is not worth the addition of the recoil buffer. I would respectfully disagree. The AK-47 is probably the most hardy rifle ever invented. The barrel is chrome lined, so will basicallyh never wear out. The trigger group is a drop in easy fix system, and you cannot tear one up. Why not take the one part that can cause you a problem and fix it? With a recoil buffer this rifle should last 3 lifetimes, even as many rounds as I put through firstname.lastname@example.org
10-26-2008, 03:42 PM #8
Nice write up and how-to Rusty
Was gonna install one of these buffers in my 1911, but I heard they cause reliability issues on the pistol platforms Have not heard such things on the rifles ones73
Someday someone may kill you with your own gun, but they should have to
beat you to death with it because it is empty.
The faster you finish the fight, the less shot you will get.
10-26-2008, 03:48 PM #email@example.com
12-28-2008, 04:01 PM #10
I opened my ak and found a leather buffer in it.have you ever seen or heard of this